Skip to content

Humanoid Robotics Concept Day

Six humanoids.
One day.
Your company.

No video, no pitch: we bring six humanoid robots into your production hall and run them live through nine use cases. In a single day you see what these machines can do today - and where they fall short.

6
Humanoids on site
9
Use cases live
1
Roadmap for 3–5 cases
Core element 1 · Experience
Robot presentation,
live demo & testing.

We introduce the six systems, their platforms and their controls in detail - and test them live with parts and boxes from your own company. Honestly, including the cases that don't work.

Core element 2 · Decide
Scoping &
Strategy workshop.

In the facilitated workshop we translate what you've seen into a longlist of possible use cases for your company - and select the core three to five use cases for the concept and roadmap.

The lineup

Six humanoids
that really get to work.

Four on legs, two on wheels - each with clear capabilities and honestly stated limits.

01 · 1.76 m
Walker S2 humanoid robot by UBTECH Robotics
Walker S2
UBTECH Robotics
Industrial · Bipedal
  • Carries up to 15 kg
  • Working height 0–1.8 m
  • Speed 2.0 m/s
  • Autonomous battery swap
Can

Already deployed in real factories: sorts parts, moves trays, assembles. Swaps its own battery in under 3 minutes.

Limit

One of the most expensive platforms in the set - a swap station and second battery belong in the package.

02 · 1.53 m
Atom humanoid robot by Dobot Robotics
Atom
Dobot Robotics
Precision · Bipedal
  • Carries 5 kg per arm
  • Sub-millimetre precision
  • Slow pace
  • Learns by demonstration
Can

The finest handling in the lineup: bottles, vials, small parts. It learns new grips by being shown them.

Limit

Slow gait, not a mobility candidate. At 10–12 kg it hits its upper limit.

03 · 1.32 m
G1 EDU humanoid robot by Unitree Robotics
G1 EDU
Unitree Robotics
Mobility · Bipedal
  • Carries 3 kg per arm
  • Up to 5 kg two-handed
  • Speed 2.0 m/s
  • Stairs yes
Can

Sorts, picks, transports up to 5 kg and operates stations. Climbs stairs and gets back up on its own after a fall.

Limit

10–12 kg is the ceiling. At 1.32 m it's built compact - measure panel heights in advance.

04 · 1.73 m
A3 humanoid robot by Agibot
A3
Agibot
Dynamics · Bipedal
  • Carries 3 kg per arm
  • Runs up to 5 m/s
  • Runtime up to 10 h
  • Battery swap in 10 s
Can

Movement and interaction: runs, responds to voice commands and lasts up to 10 h. The battery swaps in 10 seconds.

Limit

3 kg per arm, built for stage and audience rather than the line. Gripping hands only in the Ultra version.

05 · 1.76 m
Cruzr S2 humanoid robot by UBTECH Robotics on a wheeled base
Cruzr S2
UBTECH Robotics
Industrial · Wheeled base
  • Carries up to 15 kg
  • Working height 0–1.8 m
  • Moves on wheels
  • Runtime approx. 6 h
Can

Same hands and eyes as the Walker S2, just on wheels. The direct "wheels instead of legs" comparison.

Limit

No stairs, no uneven floors. Around 150 kg - clarify floor load in advance.

06 · 1.23–1.80 m
G2 humanoid robot by Agibot on a wheeled base
G2
Agibot
Assembly · Wheeled base
  • Carries 5 kg per arm
  • Force control 0.5 N
  • Speed 1.5 m/s
  • Hot-swappable batteries
Can

Torque sensors in every arm joint: it feels how firmly it grips and assembles with sub-millimetre precision. Drives itself to the charging station.

Limit

Around 185 kg - the heaviest system in the set, clarify floor load in advance. No stairs, runtime approx. 4 h.

Humanoid robots of the Concept Day, set up at the robotics partner Not a rendering - fully calibrated at the robotics partner

Who can do what

Nine use cases,
played out live.

Almost the whole field keeps up to 5 kg. Only the jump to 10–12 kg separates it - and that's exactly the limit we push live on site.

UC 1
Sorting, picking & scanning

Recognise parts, grasp them, place them correctly - the basis of almost every logistics and manufacturing task.

UC 2
Grasping & placing

Fine motor skills with bottles, vials and small parts - where precision decides scrap rates.

UC 3
Transport up to 5 kg

Material from A to B - the discipline almost the whole lineup masters today.

UC 4
Box transport 10–12 kg

The load test: this is where the field splits, and we show it without gloss.

UC 5
Operating machines & stations

Pressing buttons, operating panels, loading workpieces - robots in your existing equipment.

UC 6
Mobility & navigation

Autonomously through the hall: obstacles, routes, stairs - legs versus wheels in direct comparison.

UC 7
Perception & voice control

See, understand, react - how the systems respond to voice commands and their surroundings.

UC 8
Autonomous battery swap

The Walker S2 swaps its own battery in under 3 minutes - continuous operation without a break.

UC 9
Live demo with your parts

The most important case: testing with parts, boxes and tasks from your own company.

How the Concept Day runs

From setup
to roadmap.

Day before
Arrival &
setup
Preparation
  • Transport of the six systems
  • Setup, calibration, power and network
  • Safety check and floor load
Core element 1
Robot presentation,
live demo & testing
Approx. 1 day · 1–3 sessions · up to 70–100 people per session
  • All six platforms presented in detail
  • Live demos along the nine use cases
  • Extensive testing with parts and boxes from your company
  • Session repeatable up to 3× - for more colleagues or multiple shifts
Core element 2
Scoping &
Strategy workshop
Half a day · facilitated · max. 12 people
  • Distil insights from the demo and testing
  • Longlist of possible use cases for your company
  • Assessment by feasibility, impact and maturity
  • Selection of the core three to five use cases
Afterwards
Teardown &
follow-up
Results
  • Teardown and removal
  • Preparation of the longlist and results
  • Concept and roadmap for implementation

Timing: Both core elements fit into a single day; a day and a half is the recommended option - that leaves time for discussion between the demo and the workshop. With arrival, setup and teardown, that adds up to two to three days on site in total.

What's included

One complete package.
Everything in it.

Setup, all six robots, nine use cases, live demos, testing, workshop, concept and roadmap - at a fixed price.

Always included

  • Six humanoid robots on site: transport, setup, calibration and support
  • Detailed robot presentation: platforms, controls, SDKs and programming languages
  • Live demos along the nine use cases, including tests with parts and boxes from your company
  • Demo session repeatable up to 3×, for more colleagues or multiple shifts
  • Scoping & Strategy workshop: half a day, facilitated, with a longlist of possible use cases
  • Documentation: robot profiles, capabilities, limits and a record of the discussion

Concept & roadmap

  • Concept development: working out the three to five core use cases from the longlist
  • Roadmap for implementation: steps, effort and maturity levels up to pilot operation
  • Calibrated and tested in advance: setup, calibration and testing at our robotics partner before the systems travel to you

How many can take part

  • Live demo: up to 70–100 people per session, depending on the venue
  • Workshop: max. 12 people, deliberately small for focused work
2–3
Robotics specialists

Setup, operation and teleoperation of the six systems, robot presentation and support throughout the live demos and tests.

1
Workshop lead

FUTURE CANDY. Facilitation of the Scoping & Strategy workshop and preparation of the longlist.

2
Developers from our partner

Can program the robots on site and adapt them to your equipment, buttons and interfaces.

Fixed-price complete package.

The entire Concept Day for one fixed package price - plus only VAT and travel and logistics costs as incurred. In a short phone call we agree on the date, scope and number of demo sessions.

Request a quote

Results

What you'll have
afterwards.

Prerequisites

What we need
from you.

Nick Sohnemann

Your contact

Nick Sohnemann
Founder & Managing Director

Nick has been bringing humanoid robotics to stages, factory floors and boardrooms for years. He'll agree the date, scope and number of demo sessions with you - a short phone call is enough to get started.

Request the Concept Day

Bring the humanoids
into your company.
Your details
Where should the Concept Day take place?

Thanks, got it!

We'll get back to you as soon as possible.

Read more

More robotics
at FUTURE CANDY.

Trend topic
Humanoid Robots

What humanoid systems can do today, where they stand - and why the window to decide is open now for early movers.

↗
TECH FLAT
Our robot pool

18 robots in our own fleet - humanoids, quadrupeds and service robots, bookable individually or as a package.

↗
Magazine
Six humanoids, one day: what robots can really do today

The story behind the Concept Day: why marketing videos only show the successful takes - and how we probe the real limits on site.

↗